 |
Additive Inject Cart | Additive Inject Cart Photos |
Additive Injection Cart type 800 is a mechanically assembly designated to provide a means of injecting a metered amount of an additive into a base fuel. The genereal configuration of the unit is a four (4) wheel steerable front axel cart with top deck and lunette eye towbar. Installed with the required components and piping for the fuel delivery/injection process. |
| |
| Specification and Features (Model # FB968): |
Features include the following:
- Four (4) 6.90x9 pneumatic foam filled tires
- Twobar parking brake
- Model 800 fluid motor using product flow to drive the injection pump
- Rated flow of 50 to 750 GPM with control panel
- Holder assembly for 55 gallon drum
- Desiccant dryer for vent and stainless steel wetted parts for storage drum suction connection
- Storage barrel hold down bands
- Felxible additive hose with quick disconnect fittings
- International standard 3 plug bayonet flanged intel adapter to mate to refueler
single point underwing nozzel
- 15 feet x 2.5 inch aircraft reguling hose with commercial single point underwing nozzel
- Static ground reel.
- Unit also equipped with a positive displacement meter, with large numeral counter
- Maximum flow rate of 350 GPM
- Anodized aluminum case
|
| |
 |
| Unit completely assembled. All main product piping of welded aluminum. Entire unit finished with two (2) coats of white epoxy paint. the unit does not include optional additive storage tanks. |
