GNY Safety Break-Away Couplings (Collar Design)

By Jay Shah on Aug 04 in Oil and Gas Handling Products.

Oil & Gas Handling Product

GNY SBC – Collar Design

Safety Break-Away Couplings | Shear-Pins Design | Collar Design

 SBC Applications | SBC Testing | Customer References | Fax Sheet

GNY SBC - Collar Design

GNY SBC – Collar Design

  • Sizes: 2″ to 12″NB (50 to 300 mm)
  • End Connections: Flange Ends or Threaded Ends (2″ & 3″) or Combination (style 20)
  • Pressure Rating: At temp. -20°F to 250°F (-29°C to 121°C)                ANSI Class 150 (PN 20) = 285 PSIG (19.5 Bar) and                ANSI Class 300 (PN 50) = 740 PSIG (51 Bar)
  • Material of Constructions:  SS304/ SS316 Body or CF8 (SS304) /CF8M (SS316) Casting with SS316 Internals.               Split-Hub, Manual Lever, Handle Pullpin, Chain: SS316/SS304
  • Seals: Viton®, Buna-N, Teflon® (PTFE), Silicon, EPDM, and Neoprene. (Viton® & Teflon® regd. Trade-mark of DuPont.)
  • Design: In Accordance with Section 5 of API 6H Spec.
  • Temperature Range: For seal material Buna-N -40°F to 250°F,  Viton® -20°F to 400°F, Teflon® (PTFE) -60°F to 550°F.  For low or high temp. applications, contact factory
  • Manual Release: Manual Handle Release at the Jetty location       Dual Release: Manual Handle Release + Hose Pull away Cable Release (15 Meters long)       Triple Release: Manual Handle Release + Hose Pull away Cable Release + Remotelly controlled Elec./ Air Release
  • Hydro-Testing: Each Half separately internally Hydro-tested as per API 6H Specs.       For ANSI Class 150 (tested at 430 PSIG = 30 Bar) and       For ANSI Class 300 (tested at 1110 PSIG = 76 Bar) at shop before shipping.
  • Seperation/Breakaway Testing:  Fully Assembled Manual Release Seperation Test at shop
  • Functional Flow Testing: Fully Assembled Functional Flow Tests are available and conducted during R&D.     A Third-Party (BVIS/equal) witnessing Hydro-test, Breakaway test & Functional flow-test report, available.
  • Re-Assemble in ther Field without and spare part, refer to Installation Instruction.
Data Table for ANSI Class 150 (Collar Design) for Jetty
Size Model Number Over-All-Length (Inches) Weights

2”

SBC-2-150-SP

8.25”

13.60 Kgs. (30 lbs.)

2-1/2”

SBC-2.5-150-JETTY

8.50”

20.40 Kgs. (45 lbs.)

3”

SBC-3-150-JETTY

8.50”

36.30 Kgs. (80 lbs.)

4”

SBC-4-150-JETTY

12.75”

71.70 Kgs. (160 lbs.)

6”

SBC-6-150-JETTY

12.75”

87.50 Kgs. (193 lbs.)

8”

SBC-8-150-JETTY

14.00”

145 Kgs. (320 lbs.)

10”

SBC-10-150-JETTY

17.00”

209 Kgs. (462 lbs.)

12”

SBC-12-150-JETTY

20.00”

252 Kgs. (558 lbs.)


Safety Break-Away Couplings

Fax Sheet for a SBC order

Top