Blog

GNY 6000 Dual Hydrant

Aviation Ground Refueling Product GNY 6000 Dual Hydrant Aircraft Ground Service Pits Design To: Provide Fuel service directly to aircraft on the ramp. Other applications include fuel isolation, combination fuel high point vent/low point drain, water service, air start, preconditioned air, electrical service and surge suppressor. In addition the Model 6000 pit can be used for maintenance and vault access. Pit Shell: The Model 6000...

GNY 1463 Electrical

Aviation Ground Refueling Product GNY 1463 Electrical Aircraft Ground Service Pits Design To: Provide aircraft with 400Hz electrical service used to power the aircraft on the ramp. Shown with receptacles. Other applications include fuel hydrant, fuel isolation, combination fuel high point vent/low point drain, water service, air start, preconditioned air, surge suppressor and sump. In addition the Model 1463FM pit can be used for...

GNY Pit Cover Testing

Aviation Ground Refueling Product GNY Pit Cover Testing Aircraft Ground Service Pits Pit Cover Testing: Each cover is guaranteed to withstand a dual 200,000 lb (90720 Kg) load applied over 200 square inches (1290 cm²) tire footprint areas placed anywhere on the cover (1000 psi (70.3 Kg/cm²) rating). This represents a 4:1 safety factor. Quality Assurance: All covers are proof load tested and evaluated in...

GNY Electric Deadman Handle

GNY Electric Deadman Handle

Aviation Ground Refueling Product GNY Electric Deadman Handle GNY Electric Deadman Handle GNY deadman controls are conveniently designed for use on aircraft refuelers, bottom loading installations, fueling carts and other applications where controlled deadman operations are required. GNY deadman handles are designed to be "user friendly" for ease of operation in all climates. ...

GNY Fuel/Defuel Valve

Aviation Ground Refueling Product GNY Fuel/Defuel Valve GNY Fuel/Defuel Valve Fuel/Defuel valve is a flow diverter to permit reversing flow from a fueling mode to a defuel mode with a simple one eighth turn of valve handle. Fueling is through the 6" ports and defueling (to the aircraft) through the 3" ports.3" and 6" victaulic connections. For ease in installation, We have incorporated Victaulic porting...

GNY Aviation Swivel Joint

GNY Aviation Swivel Joint

Aviation Ground Refueling Product GNY Aviation Swivel Joint Aviation Swivel Joint GNY has been manufacturing since last three decades, Aviation Swivel Joints for GNY’s Floating suctions, Liquid fifth wheels, Hydrant carts, and Refuelers. The Swivel joints are available in two different design (two piece design and split flange design), in three different materials, with two types of seal design, three different sealing materials...

GNY Alu. Bypass Pressure Relief Valve

Aviation Ground Refueling Product GNY Alu. Bypass Pressure Relief Valve GNY Alu. Bypass Pressure Relief Valve Designed for use on aircraft refuelers and hydrant servicers to protect the pumping, filtering and metering equipment. The GNY valve features Aluminum construction and a 3" victaulic grooved inlet and outlet. Pressure range from 40-150 PSI (Factory Set at 100 PSI). Left: Picture showing Aluminum Bypass Pressure Relief Valve Also Visit Fuel/Defuel Valve Picture...

GNY Equipment, Inc. -Serving Worldwide

General Information

General Information GNY Equipment, Inc., warrants equipment it has manufactured against defects in material and workmanship under normal and proper usage for a period of twelve (12) months from the date of shipment. This express warranty is in lieu of and excludes all other representations made, both expressed and implied.If such equipment should fail through a defect in workmanship or material, and...

GNY Performance Information

Performance Certificate

Performance Certificate GNY Equipment, Inc. is committed to delivering QUALITY PRODUCTS 'ON TIME' at minimal optimum cost. We warrant our products for a period of 12 months from the date of installation or 18 months from the date of EXPORT Shipment, whichever occurs earlier to the extent, that we will repair or replace, F.O.B. Ex-Factory Bay Shore, NY, USA any product, if...