GNY Additive Inject Carts
GNY Additive Inject Carts
Additive Injection Cart type 800 is a mechanically assembly designated to provide a means of injecting a metered amount of an additive into a base fuel.
Additive Injection Cart type 800 is a mechanically assembly designated to provide a means of injecting a metered amount of an additive into a base fuel. The general configuration of the unit is a four (4) wheel steerable front axle cart with top deck and lunette eye towbar. Installed with the required components and piping for the fuel delivery/injection process.
The general configuration of the unit is a four (4) wheel steerable front axle cart with top deck and lunette eye towbar. Installed with the required components and piping for the fuel delivery/injection process.
- Four (4) 6.90×9 pneumatic foam filled tires ◦ Twobar parking brake
- Model 800 fluid motor using product flow to drive the injection pump
- Rated flow of 50 to 750 GPM with control panel
- Holder assembly for 55 gallon drum
- Desiccant dryer for vent and stainless steel wetted parts for storage drum suction connection
- Storage barrel hold down bands ◦ Flexible additive hose with quick disconnect fittings
- International standard 3 plug bayonet flanged intel adapter to mate to refueler single point underwing nozzle
- <span”>15 feet x 2.5 inch aircraft reguling hose with commercial single point underwing nozzle
- Static ground reel.
- Unit also equipped with a positive displacement meter, with large numeral counter
- Maximum flow rate of 350 GPM
- Anodized aluminum case
- Non-ferrous internals
